eMMC software

Technical notes (PDF) – 12.12.2023

This technical note describes the device health information provided by JEDEC for Micron’s Automotive and Industrial eMMC 5.1 TLC Pearl devices and describes how to obtain and use additional health information provided by Micron's health report.

Technical notes (PDF) – 11.9.2023

This technical note presents best practices for recording usage model (UM) data from a Linux® system, and then explains in detail a UME report resulting from the usage model analysis and accelerated usage model test.

Technical notes (PDF) – 8.3.2023

This technical note describes temperature-related features supported by Micron's eMMC 5.1 TLC devices.

Technical notes (PDF) – 7.31.2023

This technical note describes temperature-related features supported by Micron's eMMC 5.1 TLC devices.

Technical notes (PDF) – 6.21.2023

This technical note is a guide for partitioning an e.MMC device according to the 4.41 version of the JEDEC specification and above. It discusses how to set a physical partition configuration, how to set a general or enhanced partition, and how to access a partition in addition to explaining the registers used in partitioning.

Technical notes (PDF) – 5.3.2023

This technical note is a design-in checklist for e.MMC and 5.1 devices, created to help customers plan resources for their automotive memory designs during the design-in phase

Technical Notes (PDF) – 4.11.2023

This technical note describes additional data refresh features available in Micron e.MMC automotive 5.1 devices built with Micron firmware.

Software Documentation – 8.1.2022

System info is a tool that allows customer to dump all information of their system.